Pack of 5 chalkballs

60 gm Chalkball - Ideal for use on an indoor climbing wall as it reduces air born chalk dust or outdoors by limiting the risk of spilt chalk over the crag environment.

We use only ITALIAN pharmaceutical grade Magnesium Carbonate chalk with fabric woven in the Pennines. This allows excellent leeching of the chalk on to the climbers hands.

Dry 5 Friction

Dry 5 Friction is a superior alcohol based chalk cream that has taken us 2 years to develop. It gives excellent performance, it dries the hands quickly and keeps them dry enabling the climber to complete difficult bouldering problems without the need to re chalk during ascents.

Exerflex Power Putty

Exerflex Power Putty 56gm jar. - Available in 3 resistance levels, yellow (easy), green (med) and blue (hard). Great for warming up the fingers before climbing or strengthening finger and arm muscles in front of the TV. Comes complete with resealable screw top jar and 12 suggested exercises.

Finger Support Tape

Finger Support Tape 10m length, 1.25 cm and 2.50cm width. - Zinc Oxide tape for protecting the finger joints from injury whilst climbing.
Suggestions for safe taping are included

By incorporating a rigid system on this belay/rappel device, climbers go from full lock-off to whipping out rope in a single smooth action - no more binding up as the device tries to free itself.

The amount of friction can be completely adjusted to suit your particular need. Does your climber outweigh you? Are you using skinny ropes? Then set up the brake line through the V-Slots! Clipping in short (into the oblong hole in the centre of the stem) adds even more braking power. Climbing with fat ropes a skinny partner or on low angle slabs? Then belay off the U-Groves and clip in to the bottom hole of the SBGII for less friction.

If you ever rapped on a single 8mm or 9mm rope with other belay devices you know what a fast and loose ride that can be! With the SBGII, wrap that skinny cord around the rigid stem and rappel, figure-8 style, for the ultimate in control and safety.

Omega Pacific link Cam Spring Loaded Camming Device

With more range per unit than any other camming device in the world, Link Cam SLCD's provide faster, easier and more secure placements than ever before possible. Based on a concept by legendary gear designer Greg Lowe, Link Cam SLCD's incorporate tri-sected, hinged cam lobes in place of typical one piece lobes so that as you retract them the lobe "unfolds" to permit narrower placements than previously available with older, limited range cams.

The constant angle logarithmic spiral is the foundation of all spring loaded camming devices. Generally speaking, the steeper the angle, the greater the range, whilst lower angled spirals provide greater holding power, particularly in slick, polished rock. Link Cam SLCD's boast a 13.5 degree constant cam angle throughout the entire range to maximise holding power.

Combined with the Link Technology, Link Cam SLCD's   provide an awesome 2.5:1 camming ratio without sacrificing security or strength. No other camming device in the world offers this much range or security! Each LinK Cam SLCD is rated at 14KN and has been tested to meet or exceed that rating throughout it's entire range.

We stock a wide range of Omega Pacific Products. Please contact us for further details.